Steve,
My name is also Steve, and I am also fixing up a 1980 C&C 36, so it
would help to reduce confusion if you would provide a little more
identification in your posts. Most of listers have adopted the convention of
signing with our boat model and location, or something along that line. I look
forward to comparing notes on our respective projects. If you have the rig
down, I would like to know what size thread is on the intermediate shroud
rigging screw. One of mine broke in hurricane Matthew. It looks like 5/16 from
the deck, but I would like to know without having to climb up there.
Steve Thomas
C&C36
Merritt Island, FL
---- Steve via CnC-List <cnc-list@cnc-list.com> wrote:
My newly acquired 1980 CNC 36 had the heads cut off of the intermediate
shrouds. In trying to get them re-headed I discovered I'm missing 1 ball from
under the cap. The through bolt needs replacing as well as possibly the caps.
Question is, did Navtec go to a different option because of the dissimilar
metals issue? Suggestions please?
Sent from my iPhone
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
