I would suggest butyl and thru-bolting
On 2/27/2017 4:15 PM, Marek Dziedzic via CnC-List wrote:
may I suggest butyl tape and mounting screws?
Marek
*From:* Joe Della Barba via CnC-List
*Sent:* Monday, February 27, 2017 14:54
*To:* cnc-list@cnc-list.com
*Cc:* Joe Della Barba
*Subject:* Stus-List caulk question and West 6-10 to the rescue
Questions - the new vent does not fit into a deck plate, it is designed to
mount directly to the deck. They suggest using silicone caulk. I already
have 4200, would that work? Also I my experience, something with that much
flat surface against the deck is going to be very well glued on by the
caulk. I doubt it will ever come loose unless I run a blade under it,
so do
I need to bother with the mounting screws into the deck?
Joe Della Barba
j...@dellabarba.com
Coquina
C&C 35 MK I
_______________________________________________
This list is supported by the generous donations of our members. If
you wish to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
