It’s all coming back to me.  Space was an issue on the 34, and I also switched 
the side of the pump.  I forget the toilet type, but it barely fit even as 
reconfigured.

From: Kevin Paxton via CnC-List 
Sent: Monday, April 17, 2017 10:58 AM
To: cnc-list@cnc-list.com 
Cc: Kevin Paxton 
Subject: Re: Stus-List Toilet Replacement Mounting question

Ed, 
I got the Jabsco compact and was actually concerned about the size of it as 
well. I'm debating on switching the side of the pump as well. Did it gain you 
that much room?


On Mon, Apr 17, 2017 at 10:21 AM Edward Levert <weeselev...@gmail.com> wrote:

  Kevin:

  I recently replaced the head on my "81 C&C 34. Rather than the hanger bolts 
shown at Home Depot at $20 each, I used lag screws. Much cheaper. Also, I was 
able to fit a large bowl Jabsco into the head compartment by reversing the pump 
to the left side of the head. Otherwise, the angled wall forward of the head 
prohibited from raising the seat.

  Ed
  Briar Patch
  New Orleans, La.

  On Mon, Apr 17, 2017 at 7:33 AM, Kevin Paxton via CnC-List 
<cnc-list@cnc-list.com> wrote:

    Hey everyone, 
    I'm going to be replacing the toilet on our 34 in the next week or so. Last 
time I was down there I was looking at how it's mounted and noticed that it's 
up on a little platform and looks like there are thru-bolts holding it in 
place. I'm assuming that there is then a bolt on the underside that I will need 
to try and hold in place to loosen and tighten. I can't seem to figure out how 
to get under there though? I've thought that maybe the wall panel towards the 
v-berth comes off, but haven't tried it yet. Typically when I do something like 
that, something breaks and I'd prefer not to break something if I don't have 
to. :-)

    Any ideas on how to get to the underside of that platform for mounting a 
new toilet to it?

    Also, if I need to drill new holes for the new toilet, should I fill the 
old holes? If so, with what?

    Thanks,

    Kevin Paxton
    '82 34 #473
    Japhys Spirit
    Cornfield Creek, Pasadena, MD

    _______________________________________________

    This list is supported by the generous donations of our members. If you 
wish to make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

    All Contributions are greatly appreciated!





--------------------------------------------------------------------------------
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to