Depending how close it is to the fiberglass, put a small amount of heat to the fitting with highly directed propane flame alternating with penetrating oil and heat again. This drives the oil around the threads. Then use the extractor s l o w l y. BTDT many, many times with tractor restorations. Where every fastener is stuck after 70 years.
Bill Dakin > On Apr 28, 2017, at 8:26 AM, Joel Aronson via CnC-List > <[email protected]> wrote: > > After greasing the rudder post I managed to snap off the grease fitting. I > was planning to use a screw extractor to try to get it out. Any tips or > tricks before I make it worse? If I have to drill and tap, what size tap? > > Thanks! > > -- > Joel > 301 541 8551 > > Virus-free. www.avg.com > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
