I have concluded the old Guest charger is dead and I just bought a
ProMariner dual bank charger. The new charger looks simple to connect
....+ - connections to the two batteries and then plug it in to AC power.
My old charger didn't 'plug in' to the main control panel....it is hard
wired from the charger to the panel with a red, green and negative black
wire.....if I leave that in place from the control panel and put a 3
pronged plug at the end of the heavy duty 3-wire which is bolted to the
old charger, I should have AC power without drilling a big hole
somewhere to get the new plug from the charger one of existing AC
outlets just below my companionway. Am I making sense?
Obviously I am no electrician so just though I would check. Only after
two beer on the boat today, it seems to make sense.
Rob Abbott
AZURA
C&C 32 -84
Halifax, N.S.
_______________________________________________
This list is supported by the generous donations of our members. If
you wish to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
