Could one not screw the completed panels just like the original - with the screws going through the Plasteak and countersunk to stop the heads being proud?
-- Jonathan Indigo C&C 35III SOUTHPORT CT > On May 28, 2017, at 15:07, Persuasion37 via CnC-List <cnc-list@cnc-list.com> > wrote: > > I used PlasTeak, bought it from Defender. Only draw back is it cannot be > removed like the old panels. I screwed down epoxied coated plywood then > applied the PlasTeak. If you go this route make sure you make access panels > to access the full length of the bilge. > > Mike > PERSUASION > C&C 37 K/CB > Long Sault > >> On May 28, 2017, at 10:31 AM, Indigo via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> The teak and holly flooring on Indigo desperately needs replacing. >> >> I have 1 question for 35mk3 owners and one for all listers! >> >> 1. Can the flooring be replaced without removing vertical grab bar by the >> galley. Access to the upper end of this grab bar is under the companionway >> hatch cover? >> >> 2. What alternatives to teak and holly would listers recommend. I am not >> sure investment in the real stuff is warranted for a nearly 35 yr old boat. >> >> -- >> Jonathan >> Indigo C&C 35III >> SOUTHPORT CT >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
