Ray - not right at all. I have the same boat as you. The 33-2 has a deep sump, mine takes on no water at all.
I am assuming you have closed all through hulls and checked instrument senders. I suggest you spend 30 min and remove the table (four bolts) and cabin sole (a bunch of screws, use a cordless drill.). You will find the problem quickly enough. Dave. Sent from my iPhone > On Jun 5, 2017, at 9:31 AM, Raymond Macklin <[email protected]> wrote: > > I have a 1985 C&C 33. I have a question regarding water in the bilge area. > I just put my boat in to start the season. I found that my Bilge Pump Float > switch was not working. I also found that with the boat sitting in the > water, the bilge filled up with water in quite a short time (like it about 4 > hours) I wanted to know if that seems right. I should with the water rising > so quickly, the bilge pump would be running all the time. Does anyone know > what could be causing it? I removed the hose from the stern that fed into > it, just to make sure it was not coming from the engine compartment. Any > ideas? > > Ray Macklin > LakeHouse > Milwaukee _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
