Good thing the brackets are still there. You know, I will need to look at the boat to determine what the valves are for, I really don't know though I would assume to isolate the hot water tank. I hope you got out for a sail today - fantastic conditions a few miles out, windstar was flying. Dave.
Sent from my iPad > On Jun 11, 2017, at 7:24 PM, Doug Welch <[email protected]> wrote: > > Thanks Dave. I have the hose coming from the ice box and the clamps where the > pump was affixed to the side, so I suspect my was plumbed the same way and I > just have to replace the pump. > > I notice your intake set up is the same as mine with a tee, two valves with > one running through a filter. What is the purpose of this set up? Do the > different valves draw from differnt locations? > > Thanks > Doug > > > On Sunday, June 11, 2017 9:56 AM, Dave S via CnC-List <[email protected]> > wrote: > > > All, I have posted some photos - of interest may be the factory location of > the Beckson Siphonmate pump, (in windstar, 1985 33-2) as well as Lee's dual > footpump repurpose.. > > http://cncwindstar.blogspot.ca/2017/06/how-to-drain-ice-box.html > > Dave > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
