Edd, I feel for ya...; my autopilot (same unit, Raymarine p70) has the hydraulic drive and when engaged, it will move back and forth about 2-3 degrees incessantly...I have checked the connections and worked through the set up pages multiple times with no avail...if you find something specific, please let me know, it might be of help to my problem! Thanks!
Richard Richard N. Bush Law Offices 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -----Original Message----- From: Edd Schillay via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Edd Schillay <e...@schillay.com> Sent: Mon, Jul 17, 2017 10:34 am Subject: Re: Stus-List Raymarine Autopilot Question All, Thanks. I’m thinking it must be the connections and will double-check those. I could see the heading reading in the upper right corner of the display, so I know there were no issues with the fluxgate. I also don’t think it w the belt as the wheel drive is new and has less than two hours of total use on it — additionally, the motor was not reacting — not like it was whirring and slipping. OK — back in I go . . . http://2.bp.blogspot.com/-t84cI65qdtE/TaxAHhoNrgI/AAAAAAAABdY/74WdK5ON_Rc/s1600/photo.JPG All the best, Edd Edd M. Schillay Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
