It is a PIA job! I manged to feed the wire from the bottom and grab the end of the wire with needle nose pliers at the exit hole.
Spray the wire with McLube. It will feed easier. Joel On Wed, Aug 9, 2017 at 8:53 AM, David via CnC-List <cnc-list@cnc-list.com> wrote: > So I am trying to replace the bow light wire in the pulpit. Tried to > work the wire from both ends. Nuthin. Popped the pulpit leg where wire > exits thru deck and it looks like a feeder tube thru the deck to lead the > wire. It seems I need to remove the whole pulpit to feed a new wire. > > Am I missing something? > > Thanks in advance. > > 1981 40-2. > > > > Sent from my Verizon 4G LTE smartphone > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!