Were these on your AC panel?  I have ones provided by Paneltronics on my DC
panel but have to check my AC breaker ratings.  The ratings for some are 32
VDC and others are 80  VDC/250 VAC.  They look similar to your panel in
appearance.  So far, no problems.  Typically circuit breaker is rated for
interrupt amps and voltage.  Grossly exceed the load for the voltage rating
and they may not open.  You system should have a backup fuse or circuit
breaker rated for the maximum short circuit load.

I hope this is too much information and would try replacing the faulty
breakers.


Regards,
Ron
Ron Ricci
S/V Patriot
C&C 37+
Bristol, RI

ron.ri...@1968.usna.com


-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul via
CnC-List
Sent: Thursday, August 10, 2017 11:12 AM
To: cnc-list@cnc-list.com
Cc: paul.h...@rogers.com
Subject: Stus-List Electrical panel

I have had 2 breaker switches in the panel malfunction in the same week.  I
don't know if they are original but I assume they are.  They are Airpax
Circuit Breaker UPG6-1-52-103-91. F.L10A. MAX 65VDC. DELAY 52.  They would
become intermittent and I would need to wiggle the toggle to make it work.
I bought 2 used replacements in the meantime but interested to know if you
would recommend new panels or chock it up to coincidence and leave it as-is.
I'll order another switch to keep on hand but looking for your thoughts.

https://drive.google.com/open?id=0Bw4NOPYfe9OWNE1yeXBSWkZfb2M


Thanks,
Paul Hood
81 C&C34 - Refuge
Georgian Bay



_______________________________________________

This list is supported by the generous donations of our members. If you wish
to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!


_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to