Al Try these guys http://www.rigrite.com/Spars/SparParts/Gooseneck_toggles.php
Tom Buscaglia S/V Alera 1990 C&C 37+/40 Vashon WA P 206.463.9200 C 305.409.3660 Begin forwarded message: > From: Tom Buscaglia <[email protected]> > Date: September 13, 2017 at 8:28:47 PM PDT > To: [email protected] > Subject: Mast Gooseneck fitting > > I had a similar issue on my prior boat, a 35 Mk I, and was able to get find a > replacement. Just not sure where. But it was not too expensive. > > I'll see what I can find. > > Tom Buscaglia > S/V Alera > 1990 C&C 37+/40 > Vashon WA > P 206.463.9200 > C 305.409.3660 > > >> On Sep 13, 2017, at 4:05 PM, [email protected] wrote: >> >> Message: 5 >> Date: Wed, 13 Sep 2017 14:00:44 -0700 >> From: Al Serrato <[email protected]> >> To: "[email protected]" <[email protected]> >> Subject: Stus-List Mast Gooseneck Fitting >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=us-ascii >> >> The metal gooseneck fitting on the mast of my '34 failed. It attaches to the >> mast via 4 screws on each side. One of the two metal loops that accepts the >> boom end broke off. I have only gotten one estimate so far based on the >> photo I sent to my usual boatyard, of $1100, to remove, fabricate and >> replace. I'm waiting to hear back from some rig shops. I haven't tried to >> remove the piece myself but am guessing I won't be able to with hand tools, >> and I'm worried about stripping the screw heads. >> >> Does anyone have a suggestion as to how to repair/replace without spending >> so much? Is there a market out there for used pieces like this? Any help >> would be appreciated. >> >> Al Serrato >> Senza Fine >> 1981 '34 >> San Francisco Bay
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
