Not sure what you mean by cubby hole trim. I took a lot of trim pieces home to varnish.
On the early C&C's there is a secret to removing the frames around the storages with the slides. Three of the 4 pieces are "C" moulding. The top piece has had one leg cut off so it's an "L" moulding. The top piece is the "key" piece. It must be removed first. Small brads are in the slide grooves, Remove with needle nose pliers. Pull the piece straight out. After removing brads from the sides, they will "fold" inwards. The bottom lifts up. The frames around all the cabinet doors are fastened from behind with square drive wood screws. Dennis C. Touche' 35-1 #83 Mandeville, LA On Sep 15, 2017 6:29 PM, "Bev Parslow via CnC-List" <cnc-list@cnc-list.com> wrote: Is there an easy way to get them out? They need varnishing and I would prefer to varnish them at home. Stuck in with the gee stuff. Dental floss? _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
