Neat trick! In my case I actually have access to the bottom of the mast to get the contour.
Josh On Sat, Feb 10, 2018, 9:24 AM John Christopher via CnC-List < cnc-list@cnc-list.com> wrote: > A carpenters trick is to; > > - place the teak against the mast > - gauge the widest gap between the teak and the mast (outer edge) > - wrap tape around a pencil same amount as gap (This will give you the > widest point) > - hold teak against mast, and trace the pencil (with tape) along the mast > starting from widest point to the other end of the piece of teak. > - this results in the exact curvature you need. > - sand / cut (drum sander or otherwise) > > Contour gage works just as well, but if you don’t have one, and don’t plan > to use it often, the above saves some money. > > > /J > > On Feb 9, 2018, at 9:18 PM, Dennis C. <capt...@gmail.com> wrote: > > Tape a piece of 60 grit sandpaper to the mast. Rub a piece of teak, > Starboard, UHMW or whatever up and down until it conforms to the mast. 2-3 > beer job. Builds biceps. Better to hoist more beers. > > Dennis C. > > On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List" <cnc-list@cnc-list.com> > wrote: > >> Ok Guys, >> >> I've been test fitting the whisker pole and track extensions to the mast >> while it is pulled. I need an extra section of track to get the inboard >> end of the pole high enough so that I can stow the pole on the mast. I'm >> pretty much all set but I'm down to the chock which will hold the outboard >> end of the pole. The chock has a flat base and needs to be mounted on the >> curved leading edge of the mast. >> >> I'm interested in the collective wisdom as to how to handle this >> situation. >> >> >> Thanks, >> >> Josh Muckley >> S/V Sea Hawk >> 1989 C&C 37+ >> Solomons, MD >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> >> _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray