If you don't have a fancy contour guage or tool, use a length of solder.

Dennis C.

On Feb 9, 2018 7:28 PM, "Joel Aronson via CnC-List" <cnc-list@cnc-list.com>
wrote:

Or use a contour gauge and trace the shape. Then cut it to shape

On Fri, Feb 9, 2018 at 9:18 PM Dennis C. via CnC-List <cnc-list@cnc-list.com>
wrote:

> Tape a piece of 60 grit sandpaper to the mast.  Rub a piece of teak,
> Starboard, UHMW or whatever up and down until it conforms to the mast.  2-3
> beer job.  Builds biceps.  Better to hoist more beers.
>
> Dennis C.
>
> On Feb 9, 2018 5:20 PM, "Josh Muckley via CnC-List" <cnc-list@cnc-list.com>
> wrote:
>
>> Ok Guys,
>>
>> I've been test fitting the whisker pole and track extensions to the mast
>> while it is pulled.  I need an extra section of track to get the inboard
>> end of the pole high enough so that I can stow the pole on the mast.  I'm
>> pretty much all set but I'm down to the chock which will hold the outboard
>> end of the pole.  The chock has a flat base and needs to be mounted on the
>> curved leading edge of the mast.
>>
>> I'm interested in the collective wisdom as to how to handle this
>> situation.
>>
>>
>> Thanks,
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C&C 37+
>> Solomons, MD
>>
>> _______________________________________________
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel
301 541 8551 <(301)%20541-8551>

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and
every one is greatly appreciated.  If you want to support the list - use
PayPal to send contribution --   https://www.paypal.me/stumurray
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to