Shucks, Lee

Actually, the wicks I used were plain and uncolored.   However, in the
spirit of extreme vanity, Touche' does have customized red dock lines.  (I
didn't buy them.  They were a gift.)

https://drive.google.com/open?id=1Fjg25bh4u2BXv5t5AgpTacVed_JLHyLE

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Mon, Feb 12, 2018 at 3:19 PM, Lee Youngblood via CnC-List <
cnc-list@cnc-list.com> wrote:

> Great solution Dennis, as usual!
>
> For the rest of us, I’d like to point out Dennis may have painted his boat
> red, to go with his wick?
>
> On my “beater boat ” we use a ripped terrycloth rag, works just fine in
> rainy Seattle and looks “natural”, turns green in a week.
>
> Very happy to have the metal toe rail, Lee
>
>
>
> On Feb 12, 2018, at 5:11 37AM, Dennis C. via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> I used cotton lamp wick like this:
>
> https://www.amazon.com/Paraffin-Kerosene-Lanterns-Genuine-Superior/dp/
> B01BYLYQYY/ref=pd_lpo_vtph_201_tr_t_2?_encoding=UTF8&psc=
> 1&refRID=BGACPVC704NHP4827AC3&dpID=51iI62A7ikL&preST=_SY300_
> QL70_&dpSrc=detail
>
> I just folded it over a couple times and stitched it so it looks like a
> letter "P".  The folded over part lays on the deck and the tail sticks out
> throught the toe rail.  It hangs free of the hull so the drips fall off the
> end of the wick and don't run down the topsides.
>
> Amazon sells round wicks for about $2.  One could just tie a know in a
> couple of those and do the same thing.  :)
>
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
> _______________________________________________
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to