I used Tri Power hydraulics in Warwick for swedging. Don't know if they still
do it.
On Wednesday, May 9, 2018, 10:51:02 AM MDT, Dennis C. via CnC-List
<[email protected]> wrote:
Gary,
I bought a used Johnson Lifeline No 15 lever crimper on eBay for under $100 a
few years back. Has worked well for me. None out there now but one sold a
couple months ago for $118.
IMHO, the lever crimpers are much better than the ones you have to turn with a
wrench. For one thing, the small crimpers require you to do 5 crimps, the
lever crimpers only 3. You need to rotate the crimp 180 degrees for each crimp
otherwise the fitting will have a slight curve.
A word of caution, a used crimper may be out of tolerance due to overuse or
abuse.
Dennis C.Touche' 35-1 #83Mandeville, LA
On Wed, May 9, 2018 at 10:56 AM, Gary Russell via CnC-List
<[email protected]> wrote:
I am in the process of replacing my lifelines and am looking to buy a crimper
to crimp the Hayn studs and gate rings, etc. Can anyone recommend a reasonably
priced crimper? I've seen crimpers from $69 to $477 and can't tell the
difference.
GaryS/V Kaylarah'90 C&C 37+East Greenwich, RI, USA
~~~~~~~_/)~~~~~~
______________________________ _________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/ stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
