I switched from wire/rope to rope without a problem. Gary
30-1 From: CnC-List <[email protected]> On Behalf Of Joel Aronson via CnC-List Sent: Tuesday, May 15, 2018 10:00 AM To: cnc-list <[email protected]> Cc: Joel Aronson <[email protected]> Subject: Re: Stus-List Time for new halyard... Recommendations? If there are rough spots on the sheaves they need to be replaced before switching. Also, you need to make sure the sheave is wide enough for the rope you want to use. Joel On Tue, May 15, 2018 at 9:47 AM, Joe Della Barba via CnC-List <[email protected] <mailto:[email protected]> > wrote: My jib halyard is shot. I always assumed I needed another wire/rope because the sheaves are made for wire and would damage an all rope halyard. Is this wrong? Coquina C&C 35 MK I Joe Della Barba [email protected] <mailto:[email protected]> From: CnC-List [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of Neil Andersen via CnC-List Sent: Tuesday, May 15, 2018 9:36 AM To: [email protected] <mailto:[email protected]> ; [email protected] <mailto:[email protected]> Cc: Neil Andersen <[email protected] <mailto:[email protected]> > Subject: Re: Stus-List Time for new halyard... Recommendations? Bruce, First thing is to replace the wire/rope with all rope. Neil 1982 C&C32 Rock Hall, MD every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray -- Joel 301 541 8551
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
