All:

    So far I have about three or four requests for mostly screws from my old 
roller furler.  I will review the e-mail notes sometime next week, compare 
requests against what I have, and let you know if I think I can help.  That 
said, I reiterate that I no longer have the headstay foil.  It was cut up and 
recycled.  I now wish that I had saved the cut pieces until after I sent my 
initial e-mail, but I incorrectly assumed that the old foil pieces would have 
little value and not worth the time to deconstruct.  My bad – sorry.

     Matt   

From: Garry Cross via CnC-List 
Sent: Thursday, May 17, 2018 10:42 PM
To: cnc-list@cnc-list.com 
Cc: Garry Cross 
Subject: Re: Stus-List Harken original roller furler parts

Mathew I have Series 1. The foil connectors have roll pins. If yours is the 
same, I need one as I broke one removing the mast. 


Thanks.



----- Forwarded message ----------
From: "Matthew L. Wolford" <wolf...@erie.net>
To: <cnc-list@cnc-list.com>
Cc: 
Bcc: 
Date: Tue, 15 May 2018 13:42:09 -0400
Subject: Stus-List Harken original roller furler parts
Listers:

    Due to the inability to replace a broken torque tube, I am upgrading 
from a Harken original roller furler (1980s vintage MK 1, but not called 
that), Unit 2, to the newer Harken model.  The new one is nearly finished, 
and I cut up/recycled the old foils.  Before I recycle the rest of the old 
parts, does anyone have an interest in them (aside from the broken torque 
tube)?  Please advise if you do.  Thanks.

Matt Wolford
C&C 42 Custom 


--------------------------------------------------------------------------------
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to