Based on what my 35 my II likes first get your mast plumb side to side then uppers about 1000-1100 forward lowers 700 aft lowers 400 no back stay tension during adjustment but usually 1000 to 1500 under sail let us know what works best for you. I usually sail with high aspect ratio full main and 135 on the furler. These numbers work good with that sail configuration. Boat has wire standing rigging.
Sent from my iPad > On May 23, 2018, at 10:59 AM, Glen Eddie via CnC-List <cnc-list@cnc-list.com> > wrote: > > Hello everyone, > > Just curious if anyone has the standing rigging tension for the shrouds on a > C&C 35 Mk1. I have lost my sheets with the numbers. > > Thanks in advance. > > Glen Eddie > Tel: 416-777-5357 > Fax: 1-888-812-2557 > ged...@torkinmanes.com > VCard > Torkin Manes LLP > Barristers & Solicitors > 151 Yonge Street, Suite 1500 > Toronto ON M5C 2W7 > torkinmanes.com > An international member of Ally Law > > This email message, and any attachments, is intended only for the named > recipient(s) above and may contain content that is privileged, confidential > and/or exempt from disclosure under applicable law. If you have received this > message in error, please notify the sender and delete this email message. > Thank you. > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
