You can make these all kinds of ways. What kind of engine is it? Any chance of a photo posted someplace? Joe Coquina
From: CnC-List [mailto:[email protected]] On Behalf Of Steven Tattrie via CnC-List Sent: Tuesday, May 29, 2018 3:34 PM To: cnc-list <[email protected]> Cc: Steven Tattrie <[email protected]> Subject: [EXTERNAL] Stus-List exhaust and cooling water connector "Y" Hi All, The "Y" on my where the cooling water connects to the exhaust rusted out and I am rebuilding it. It was made out of 1 1/4 " steel water pipe. A 3/8 " piece was welded onto 6" of straight pipe to make a "Y". The 3/8" piece is where the cooling water would travel into the 1 1/4" exhaust. My question is: could this simply be a "t" shaped piece made out of 1 1/4 inch t with a reducer to fit the 3/8" connector for the cooling water. Rather than weld up a "y". Steve
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
