You could buy on of those Craig's list C&Cs and use the mast, sell the lead from the keel, and make money on the deal...
Richard s/v Bushmark 4; 1985 C&C 37 CB; Ohio River Mile 596; Richard N. Bush 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -----Original Message----- From: M Bodnar via CnC-List <cnc-list@cnc-list.com> To: C&C List <cnc-list@cnc-list.com> Cc: M Bodnar <drbod...@bedfordchiro.ca> Sent: Tue, Jun 12, 2018 2:31 pm Subject: Stus-List Mast damage Discovered over the weekend that my mast blew off the rack at the boat yard over the winter. Landed on a lower level rack and dented the side of my mast - several feet above the gooseneck. Dent is maybe 5cm long and 3cm wide - max depth of about 3mm.Met with insurance surveyor today - he is suggesting a few options - weld aluminum to the side of the mast, cut mast and install a sleeve, find a used CS 30 mast or similar and replace or replace with a new mast. Apparently the sleeve option would cause a stiff spot in the mast and make it harder to trim well for racing (which I don't do - but don't want to devalue the boat in the repair). Not sure about the weld option. No immediately available used CS 30 masts locally.Insurance has a set upper limit of $22500 on the boat - so write off is a possibility if they can't repair or find a used option.Anyone have any experience? Advice? Know of any random CS 30 masts lying around???Mark-- _______________________________________________Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
