What's the problem. Is it hard to dock? I went to a lot of trouble to get my anchor out as far as practical so it wouldn't hit the hull. Heavy duty roller/channel for the anchor, backing plate underneath and custom shim pieces molded to level the deck camber, five SS thru-bolts, some are angled. I pull the anchor when racing. I have a system using a 20 foot length of line and caribiner, clip onto the cross rod of the Delta head and tension that over the pulpit, then release the main anchor line and I can lift the Delta over the pulpit onto the deck. This takes minutes.
Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md > On June 27, 2018 at 9:30 AM Home via CnC-List <[email protected]> wrote: > > > I have a beautiful 1986 38-ft MKIII. > The one thing I hate about my boat is the anchor > The anchor sticks a mile out and it is tied at the shackle to keep it > secured. > I have been looking at other boats, no CNC in the area close by. > I was hoping someone withe same boat could tell me what they have set up > > Sent from my iPad > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
