Attention Listers,
I followed the advice of contacting Allen Hutton at
sa...@huttonwinches.com via e-mail. I sent Allen the dimensions of the
needle bearing that I needed to repair my Barient 28 ST winch. He told
me that he had the bearings, gave me the part number and I ordered two
of them this evening, supplying my credit card in a fairly secure way
and they will be shipped to be via insured mail. What great customer
service. I highly recommend this company and Allen. Though everyone
should know.
Glenn Gambel
Wind N Spirits
1981 C&C 36
------ Original Message ------
From: "Ken Heaton via CnC-List" <cnc-list@cnc-list.com>
To: "cnc-list" <cnc-list@cnc-list.com>
Cc: "Ken Heaton" <kenhea...@gmail.com>
Sent: 7/4/2018 5:46:30 PM
Subject: Re: Stus-List Barient 28 two speed self tailing winch bearings
I'll second Arco winches in Australia. Great service and they sip
quickly if they have the part. They have most bearings for Barient
winches..
THE AUSTRALIAN YACHT WINCH PTY. LTD.
PO Box 401
Galston N.S.W. 2159 Australia
Phone: +61 2 9653 2111
Fax: +61 2 9653 3119
Email: sa...@huttonwinches.com
All prices quoted on this site, unless otherwise specified, are in US
dollars.
http://www.arco-winches.com/products/spares
They return emails quickly.
Ken H.
On Wed, 4 Jul 2018 at 17:42, Glenn Gambel via CnC-List
<cnc-list@cnc-list.com> wrote:
I decided to clean my Barient 28 two speed self tailing winches today.
It was sunny and nice and I had been putting the project off for a
while. I did not think I would run into many problems, and that was a
mistake. I did, but won't go into those now. Suffice to say, I did
get the winch apart and was cleaning the parts and organizing them for
reassembly, and discovered that one of the bearing had separated.
Though I recovered all of the parts and have them, I think reassembly
may be very difficult, and even if I could reassemble the thing, I
suspect that it may not hold together once the winch is operated,
especially under load.
Does any one know where I might order new bearing or find new bearings
for my Barient 28 two speed self tailing winch? Any idea or help
would be appreciated. I would get the part number, but have to figure
that out.
Sincerely,
Glenn Gambel
Wind N Spirits
C&C 36
_______________________________________________
Thanks everyone for supporting this list with your contributions.
Each and every one is greatly appreciated. If you want to support the
list - use PayPal to send contribution --
https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
