Derek:
I have a Yanmar 2GMF.....the engine has several 'drains' for the engine
coolant which will empty by gravity. Each drain is opened by loosening
what looks like a 'wing nut' and each drain fitting has a small diameter
rubber hose attached which is useful to direct the coolant into a
container for proper disposal when opened.
Very easy job to do if you have the same setup which you should.
Rob Abbott
AZURA
C&C 32- 84
Halifax, N.S.
On Thu, Jul 19, 2018, 6:27 PM Tortuga via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
I have a Yanmar 2QM15 with a Sen-Dure heat exchanger. I'd like to
change the coolant. Can I pump out the old?
Thanks
Derek Kennedy
SV Tortuga
C&C30 mk1, #553
Ballantyne's Cove, NS
_______________________________________________
Thanks everyone for supporting this list with your contributions.
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
