Don't force it, get a bigger hammer! Seriously, on the new boat I had to give the cold plate a few "taps" with a three lb hammer to break it free. Are you sure there are only two screws? Mine were fastened at all four corners. Andy
Andrew Burton 61 W Narragansett Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Aug 21, 2018, at 15:10, Edd Schillay via CnC-List <cnc-list@cnc-list.com> > wrote: > > Listers, > > I’ve ordered a whole new refrigeration system for the Enterprise and I’m now > working on removing the old one. I got the compressor out (note: NOT > recommended for August in New York in that back cabin. I think I sweated > enough to fill the bilge) and I’m having trouble getting the > evaporator/freezer out of the ice chest. The two screws are loose, but the > whole thing seems glued in place. > > Any suggestions? > > All the best, > > Edd > > > Edd M. Schillay > Starship Enterprise > C&C 37+ | Sail No: NCC-1701-B > City Island, NY > Starship Enterprise's Captain's Log > > > > > > > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray