Will do Marek!

Sent from Yahoo Mail for iPhone


On Saturday, October 13, 2018, 4:52 PM, Marek Dziedzic via CnC-List 
<cnc-list@cnc-list.com> wrote:

If you call Garhauer, talk to them about replicating your bolt pattern. That 
way, you could re-use all the mounting holes. 
Marek 


Sent from my Samsung Galaxy smartphone.

-------- Original message --------From: Sam Salter via CnC-List 
<cnc-list@cnc-list.com> Date: 2018-10-13 10:26 (GMT-05:00) To: 
cnc-list@cnc-list.com Cc: Sam Salter <sam.c.sal...@gmail.com> Subject: Re: 
Stus-List C&C 26' or 27'? 
Not necessarily cheap, but Harken makes a track that has a longitudinal slot on 
the underside. It fits the head of the installation bolts so they can slide 
anywhere along the track. No filling and redrilling  - they can match the 
original bolt spacing - easy, quick install.
sam
On Oct 13, 2018, at 7:13 AM, Chris Graham via CnC-List <cnc-list@cnc-list.com> 
wrote:

I need to first replace the main traveler system. Any suggestions with a system 
that won’t break the bank?
Chris 


Sent from Yahoo Mail for iPhone


On Friday, October 12, 2018, 10:43 PM, Sam Salter via CnC-List 
<cnc-list@cnc-list.com> wrote:

Roller furler - Profurl

sam 
On Oct 12, 2018, at 5:19 PM, Chris Graham via CnC-List <cnc-list@cnc-list.com> 
wrote:

Gotcha! 
Roller furling or hank on Sam?


Sent from Yahoo Mail for iPhone


On Friday, October 12, 2018, 7:16 PM, Sam Salter via CnC-List 
<cnc-list@cnc-list.com> wrote:

Chris,
I meant to say “I upgraded to New Dacron sails and changed the Genoa to a 135”
I might have got a little more speed from the folding prop, but the laminate 
Genoa sets much better and allows me to point a little higher. A laminate main 
would improve that some more. And hopefully reduce the “bubble” at the luff.

sam
On Oct 12, 2018, at 5:03 PM, Sam Salter <sam.c.sal...@gmail.com> wrote:

Chris,
When I bought the 26, It came with a 150 Dacron genoa and a Dacron main. After 
a few years I upgraded to new Dacron sails and changed the main to a 135. Later 
I changed the Genoa to a 135 laminate sail from Evolution Sails in Toronto.Both 
upgrades improved performance (after all it is a sail boat), but the laminate 
sail was such a difference that I think I would go with a 110 if I was doing it 
again.I still have the new Dacron main but I might go with a laminate one day. 
Best upgrades:New sailsFolding propSelf tailers (The folding prop might have 
given me more speed than the new sails)

sam C&C 26  Liquorice Ghost Lake Alberta 

On Oct 12, 2018, at 8:51 AM, Chris Graham via CnC-List <cnc-list@cnc-list.com> 
wrote:

Thank you Sam!
This 26' could be dropped in tomorrow. Most issues are cosmetic with the 
exception of one stanchion and either the water fill or septic pump out cap 
(don't want to confuse the  two) LOL So some recoring in the spring but I enjoy 
that kind of work and it really is minimal. Other than that, shes good to go.
Thanks for the input. Main sail has two reef points which I am thankful for.
Chris
On Friday, October 12, 2018, 10:46:20 AM EDT, Sam Salter via CnC-List 
<cnc-list@cnc-list.com> wrote:

I have a 1977 C&C 26.I was looking for a 27 when I bought her.The 26 wasn’t 
raced much; the 27 is still competitive!Most (many?) 27’s have been raced hard 
and put away wet.That’s why I bought the 26 - it was in much better condition 
than all the 27’s I looked at.The 26 is a tender boat!She does move quite well 
in light air.I tend to reef early; but she still moves well, even when reefed.I 
lake sail, so not sure what she’d be like in a big sea.I’ve had 7.4 knots on 
occasion and high 6’s is fairly regular.She is a roomy boat which is nice!I 
have a Yanmar 2GM20F in mine with a Flexofold prop.I’ve done lots of upgrades: 
self trailers / new sails / adjustable Genoa cars / ridged vang / etc., etc..I 
like the cockpit size and tiller steering up close to the companionway with the 
genoa trimmer behind on the winches.She’s a good, solid boat compared to the 
Hunters and Catalina’s on the lake.Don’t buy a project boat - get one you can 
sail away!Upgrades are much more fun than repairs.I see too many project boats 
that never get in the water.

sam C$C 26  Liquorice Ghost Lake Alberta 



_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray




_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray




_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray




_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to