The drill bit set is from Norseman. You can get them off Amazon. On Tue, Nov 27, 2018, 10:25 PM Lee Youngblood via CnC-List < cnc-list@cnc-list.com wrote:
> Hi All, > > I have a sweet C&C 35-II, and I’m storing a few gallons of water in the > stern of the boat, on both sides of the vertical bulkhead behind the helm. > It’s not for drinking, and I don’t know how it got there, but when I pull > the cap for the vent I can see it, and vacuumed out about 3 gallons today. > OK I live in Seattle and it’s been raining, yea a lot, but really, how much > rain comes through a few screw holes on the stern plate behind the > cockpit? I only looked because my bilge pump was going off for about 20 > sec. every 20 min. Water was trickling down below the engine, and s couple > years ago, I tossed the boat really well, and we flushed out the > construction insulation crumbs under the icebox into the pots and pans > under the stove - that was a mess and another story. Anyway, does anyone > else find water in the stern behind the helm position? Have you looked > recently? > > On another note, I thought I remembered a recommendation for a good > quality drill bit set for drilling metal, round plastic storage, not the > usual rusting metal boxes. Anyone remember the make or link? > > Thanks, Lee > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
