1+ on this from Dennis! Been there and done that when I replaced T-handle with pressure gauge.
My diesel mechanic (having replaced/tightened all other fittings) suggested replacing the Racor filter top. Done and problem gone--when Racor says hand-tighten this top--PAY ATTENTION. Sometimes too tight is as bad as too loose! Plus once the top is warped, tightening more just warps it more--a new top is the only solution for this warping. Charlie Nelson [email protected] -----Original Message----- From: Dennis C. via CnC-List <[email protected]> To: CnClist <[email protected]> Cc: Dennis C. <[email protected]> Sent: Mon, Dec 3, 2018 9:36 pm Subject: Re: Stus-List Stuffing box issue and update on dirty fuel Racor 500 fuel filter tops can warp over time allowing air to leak in. If the T-handle is over-tightened, it can cause the top to become concave. Lay a flat across the underside of the top and see if the center is depressed (raised if the top is upside down). If so, you can't tighten the T-handle enough to seal the gasket. Also, the gasket can leak if old. Replace it often. Dennis C. _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
