I can't speak for the C&C 44, but the rudder bearings on my 37+ were Delrin. I used a jig saw and split the bearings at approximately 90 degrees apart. A couple of taps and the bearings came right out.
Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA ~~~~~~~_/)~~~~~~ On Thu, Dec 6, 2018 at 10:14 PM Steve Martin via CnC-List < [email protected]> wrote: > > C&C 44 with spade rudder and harken top bearing... > How much play is too much and does anyone know sizes and how to remove > upper and lower bearings... and any other info on what I might be in for > tackling this job... > Thanks > > Sent from Yahoo Mail on Android > <https://overview.mail.yahoo.com/mobile/?.src=Android> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
