Gary,
You don’t say what brand you have but does the paddlewheel have straight or curved paddles on it? If they are curved you may have put the paddlewheel back on the transducer backwards. Rick Taillieu Boatless Leamington, Ontario From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: July-26-19 17:34 To: cnc-list@cnc-list.com Cc: Gary Nylander Subject: Re: Stus-List Boat Speed Paddlewheel ?'s I have also been having issues with my speed transducer. I pulled the pin, cleaned the wheel, made sure the pin was straight, and I could flick it by hand and it would measure OK. Put it in the water, no good. Bought a new wheel, went through the same deal, got the same result. I cannot figure out why it will rotate freely in air, measuring accurately, and then won’t work at all when installed. New wheel, old wheel, new shaft, old shaft, no change. Any ideas? Gary
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
