Actually, I made my Delran washer the other way around:
Got a square of 1/8” Delran from a buddy who owns a machine shop (actually, I asked him where I could buy some and he said “Here, take this scrap section. It’s too small for the things I normally need to make.”) Attached it to a piece of scrap plywood with a couple of spring clamp Cut the center hole with a hole saw Used the same pilot hole to cut out the washer I have enough material left to make at least one more washer if I ever need it From: CnC-List [mailto:[email protected]] On Behalf Of Della Barba, Joe via CnC-List Sent: Thursday, November 21, 2019 6:32 AM To: [email protected] Cc: Della Barba, Joe <[email protected]> Subject: Re: Stus-List delrin washer Note – if you do it yourself, use the BIG holesaw first and then use the small one in the same pilot hole.
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
