It may be sealant at the deck. Does the vertical tube go into a deck fitting? If so, remove any set screws and try to lift the tube. You may have to do the same to an adjacent tube. Once you lift the tube you may see your issue.
Dennis C. Touche' 35-1 #83 Mandeville, LA On Fri, Mar 20, 2020 at 9:10 AM David Knecht via CnC-List < [email protected]> wrote: > I had another problem the other day that I can’t figure out. I am > replacing the bow and stern lights with LED. The wire from the old stern > light runs into the stainless steel vertical tube of the rear rail and down > into the port lazarette. I have been unable to budge the wire by pulling > on it from the bottom even though it appears loose at the top. The bow > lights are similar and the wire pulls out easily. I can’t see anything > holding the wire so I am wondering if anyone has ideas or has encountered > this problem and solved it. Thanks- Dave > > David Knecht > S/V Aries > 1990 C&C 34+ > New London, CT > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
