Internal ribbing impedea flow and reduces pump capacity Sent from my Android. Please forgive typos. Thank you.
________________________________ From: CnC-List <[email protected]> on behalf of Bill Coleman via CnC-List <[email protected]> Sent: Thursday, April 2, 2020 4:29:44 PM To: [email protected] <[email protected]> Cc: Bill Coleman <[email protected]> Subject: Re: Stus-List Water fill hose question I agree, that is what I use for most of my thru hulls as well. Sirco has a husky vinyl hose with a green spiral reinforcing. https://www.sircoindustrialerie.com/ Bill Coleman Erie PA -----Original Message----- From: CnC-List [mailto:[email protected]] On Behalf Of Len Mitchell via CnC-List Sent: Thursday, April 02, 2020 4:13 PM To: CNC List Cc: Len Mitchell Subject: Stus-List Water fill hose question When replacing the original ribbed hose or even drain hose I use the reinforced clear vinyl beverage hose. It’s strong, flexible enough and will be easier to source too. Len Sent from my iPad _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
