Not those Joel. Of course the only original one I have is the throttle, starboard side. Don't know what the gear shift is suppose to look like. It appears the handle you show rotates back and forward. On mine, it actually slides up/down in a slot, same action as the throttle. Right now I have a 1/2" bolt, tapered the threads slightly and slid it in the hole, cut the head off the bolt and slid the bilge handle over the bolt for leverage. It was meant to be temporary...been a few year now. BTW, the engine is atomic 4 with reduction drive. I'll get better pictures this weekend.
Paul Hood '81 C&C34 Georgian Bay Message: 1 Date: Wed, 8 Apr 2020 11:42:49 -0400 From: Joel Aronson <[email protected]> To: cnc-list <[email protected]> Subject: Re: Stus-List Pedestal gear shift handle Message-ID: <cael16p9d6drwxhqqbxgcfxfzyrsgwzqxuhfbzpgvujvtog4...@mail.gmail.com> Content-Type: text/plain; charset="utf-8" This? http://www.marinepartdepot.com/stthha.html On Wed, Apr 8, 2020 at 12:30 AM CHARLES SCHEAFFER via CnC-List < [email protected]> wrote: > Like Josh says, your pedestal appears to be an Edson and FWIW, I > replaced my OEM plastic levers with Stainless versions and though a > little costly, much more reliable for the last 18 years. Read the > Edson manual and if you don't know how old the chain and cables are, > you may want to replace those too. IIRR, the levers cost about $50 > each and the chain/cable kit costs over $400. > > Chuck Scheaffer, Resolute 1989 C&C 34R, Pasadena, Md > > On April 8, 2020 at 12:04 AM Josh Muckley via CnC-List < > [email protected]> wrote: > > A picture of the pedestal from behind the wheel would be helpful but > from the angle you provided it sorta appears to be an Edson. If so > try the link below for replacement engine controls. > > > https://edsonmarine.com/products/pedestals-cockpit-accessories/engine- > controls-accessories/ > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > > > > On Tue, Apr 7, 2020, 23:20 Paul Hood via CnC-List < > [email protected]> > wrote: > > I have not had a proper handle for my gear shift since the PO and I > would love to fix that but can't find one. Not even sure what the > original looks > like. I have a lock and small throttle on the starboard side and the > gear > shift on the port side. I have links to my current pedestal although > not great. > > > https://drive.google.com/drive/folders/1_jr6sFse0ef4jYj9FojBck3blxWEnO > Q8?usp > =sharing > <https://drive.google.com/drive/folders/1_jr6sFse0ef4jYj9FojBck3blxWEn > OQ8?usp=sharing> > > > Paul Hood > '81 C&C34 > Georgian Bay > > > > _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
