Thanks Josh and all for the ideas. It is 8 pins into an 7/8” wide connector purpose built for the scanner. No room for solder, at least not my soldering skills. To Andy’s point…maybe just suck it up. Ugh. Another single purpose tool.
David F. Risch (401) 419-4650 From: CnC-List <[email protected]> On Behalf Of Josh Muckley via CnC-List Sent: Thursday, April 30, 2020 8:55 AM To: C&C List <[email protected]> Cc: Josh Muckley <[email protected]> Subject: Re: Stus-List D Sub Crimping... You could use a terminal board style db-9 or db-25 connector. I could probably provide a male and female 9 pin if you want. https://www.amazon.com/Connector-D-sub-25-pin-Terminal-Breakout/dp/B073RG3GG6 Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Thu, Apr 30, 2020, 08:35 David Risch via CnC-List <[email protected]<mailto:[email protected]>> wrote: So I need to crimp “D Sub” connectors for the radar. Don’t want to buy yet another specialized crimper. I understand you can use a needle nose, a magnifying glass and have at it. Any suggestions/experiences out there? Thanks in advance. David F. Risch (401) 419-4650 _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
