Hi Doug,
I routinely clean the epoxy tools with acetone. But I don't believe
your foam will stand up to it, maybe a little test patch. The fabric
might be okay.
If the foam cushion is symmetrical then how about removing it from
the fabric cover and "spilling" a bit o' hardener on the area, then
rotate installation so that part of the foam is on the bottom. If we
were talking about a Microsoft product you would sell it as an
anti-wear "feature".
Cheers, Russ
ex-Sweet, 35 mk-1
At 04:41 PM 5/11/2020, you wrote:
I need help. I spilled epoxy resin on my brand new upholstery, and
it went unnoticed for several days, so it has soaked into the new
foam also. The area is about 6 sq inches. My question is what do I
use to remove the resin with out damaging the foam?
I am not to worried about the fabric as I sewed it myself and have
plenty left over.
Thanks in advance
Doug
--
Douglas Mountjoy
253-208-1412
Port Orchard YC, WA
sv Rebecca Leah
C&C LandFall 39
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
