Hello, My wife and I own a 1988 C&C 44' and would like to make some improvements to the propane locker. As you can see from this photo <https://photos.app.goo.gl/7LQhVgmXeFWVjSE7A>, there is evidence of a fair amount of corrosion to both the terminal block that supplies the solenoid as well as rust stains on the bottom. I started exploring separating the well from the flange and after cutting away a fair amount of sealant and removing all screws, it will not budge.
My intent is to run a new hose from my stove directly into the locker, add a second drain hole because standing water accumulates on the aft side, and replace the existing drain fitting with a new hose & Y valve. Ideally, I do not want to damage the flange to remove this. Any suggestions on how to break the bond between this flange and well? Photo link: https://photos.app.goo.gl/7LQhVgmXeFWVjSE7A Thanks listers! Patrick & Kari Gateley 1988 C&C 44' "Odessa"
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray