You have a friend who does free machine shop work for you and replaces stanchions for nothing?  I'd love to meet this person! :-)

Graham Collins
Secret Plans
C&C 35-III #11

On 2020-07-08 10:41 a.m., Robert Abbott via CnC-List wrote:
With the aid of the Snap On Impact Driver, I removed the stanchion base and stanchion (stanchion was seized in the base) and gave it to my dock neighbor who took it home last Friday..  He is a retired machinist who has a workshop in his basement.  I went to the boat yesterday and the repaired unit was in the cockpit.  I am pretty sure he replaced the stanchion because this one is not scratched up at the base as was the old one.

With the assistance of another dock neighbor holding the screw driver on the two deck bolts, I tightened the nuts below the deck.

Next project?

Rob Abbott
AZURA
C&C 32 - #277
Halifax, N.S.

On 7/2/2020 5:34 PM, Dave Godwin wrote:
Rob,

Be careful about pulling the stanchions out of the aluminum bases. Hopefully yours will slip right out.

ALL of my S.S. stanchions were fundamentally welded to the cast aluminum bases. I spent may hours/days soaking in solvents and heating. Wash, rinse, repeat. Did not loosen them one bit.  A buddy with an acetylene torch took a crack at with the higher heat.

After applying the heat, he started banging on the aluminum base to free it. Which is exactly what happened when the base disintegrated. That proved to be a costly lesson…

Regards,
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit <http://roninrebuild.blogspot.com/>



_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to