https://l-36.com/compare.php
for all your winch comparison needs... :-)
Graham Collins
Secret Plans
C&C 35-III #11
On 2020-07-14 3:49 p.m., Andrew Means via CnC-List wrote:
I think the Barient 27s are measured somehow differently than Lewmar;
they're roughly equivalent to a Lewmar 40, size-wise. What size boat
do you have? Anybody have a good size comparison tool across winch brands?
On Tue, Jul 14, 2020 at 11:16 AM Matt Wolford via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
Sadly, it has been too long for me to remember what we did. I
serviced all the winches on my boat several years ago – okay,
everybody, you can chastise me now. I chuckled when I read that
your boat uses size 27 for your primaries. I use mine for my spin
pole topping lift.
*From:* CnC-List <cnc-list-boun...@cnc-list.com
<mailto:cnc-list-boun...@cnc-list.com>> *On Behalf Of *Andrew
Means via CnC-List
*Sent:* Tuesday, July 14, 2020 2:05 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* Andrew Means <andrew.cnc...@gmail.com
<mailto:andrew.cnc...@gmail.com>>
*Subject:* Re: Stus-List Barient 27 winch servicing - still squeaks!
Thanks Matt! I'll try some penetrating oil and see where it gets
me. When you got the lifter arm off were you able to adjust the
height so it no longer rubbed against the clamp ring? Or were you
able to lubricate it a bit so it didn't squeak?
Andrew
On Tue, Jul 14, 2020 at 10:30 AM Matt Wolford via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
Yes and yes. I eventually got it off, but I can’t recall now
how I did it (it was a while ago). Try using some penetrating
oil and let it sit before hitting it again. I’ll take a look
at mine and see if I can recall anything else I may have done.
*From:* CnC-List <cnc-list-boun...@cnc-list.com
<mailto:cnc-list-boun...@cnc-list.com>> *On Behalf Of *Andrew
Means via CnC-List
*Sent:* Tuesday, July 14, 2020 1:07 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* Andrew Means <andrew.cnc...@gmail.com
<mailto:andrew.cnc...@gmail.com>>
*Subject:* Stus-List Barient 27 winch servicing - still squeaks!
Hi all -
The two Barient 27 primary winches on the Safari were in sorry
shape, so last week I decided to service them. After a rather
protracted battle I was able to disassemble and
clean/oil/grease one of them to my satisfaction, however -
when reassembling the first winch I realized that, while
definitely smoother internal operations, it still squeaks!
I think I've traced it to the line lifter rubbing on the clamp
ring (see manual here
<http://svsoggypaws.com/files/Winches/Barient%2027%20ST%20Winch%20Service%20Manual.pdf>).
I didn't think I needed to remove the line lifter originally,
but after tracing the squeak there I wasn't able to unscrew it
(the manual says to tap it with a soft hammer - hitting it
rather hard with a soft hammer didn't help either).
Does anyone else have these winches on their boat? Anybody
else had this problem?
Andrew
_______________________________________________
Thanks everyone for supporting this list with your
contributions. Each and every one is greatly appreciated. If
you want to support the list - use PayPal to send contribution
-- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions.
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
