Looks about right to me. I have seen similar installs in essentially the same location on several boats.
Steve Thomas C&C27 MKIII C&C36 MKI Ontario and Florida ---- Kevin Driscoll via CnC-List <[email protected]> wrote: Hi All, I have purchased and I am planning my install of a Dickinson Cozy Cabin Heater (propane) on our C&C 30 mk II. We are not liveaboards, but we do use our boat year round here in the PNW and I miss being able to anchor on cold weekend nights due to a lack of an efficient heat source. Thus the Cozy Cabin. (Please save the safety lecture if you are so inclined as the fixture does have a low oxygen shut off and a flame out gas shut off. We have CO2 alarms, propane sniffer, and always have hatches cracked.) I am planning on installing it on the starboard side, forward bulkhead. I am plotting the location of the exhaust port and I think I am going to go more or less straight up and then angle to starboard so in theory, end up with the exhaust port co-planar with the cabin trunk. I welcome other's input however. I do not like drilling a hole in my cabin top, but it is an ~ 30 yr old boat and life is too short to stay in the marina! See pictures here: https://photos.app.goo.gl/2cpqVEfyLZ2B8EoP6 _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
