Are your existing faucets like one of these on this page: https://scandvik.com/index.cfm?method=products_detail&productID=140
Ken H. On Sun, 16 Aug 2020 at 20:14, Charlie Nelson via CnC-List < [email protected]> wrote: > My 1995 36 has ‘triangular’ faucets for the galley and head sinks. These > have the faucet handles joining the spigot at about a 45 degree angle. > > I’d like to replace them in plastic as they are showing their 25 year age > with pitting, fading etc. > > I am reluctant to buy anything but a ‘triangular’ replacement since the > supply connections may not ‘mate’ properly. Is my concern valid? > > I would prefer something in white plastic but am hesitant to buy anything > if it won’t work—especially since removing/installing these faucets will > not be easy given their locations. > > OTOH, I am hesitate to attempt to remove my faucets just to check whether > they have ‘standard’ connections (or not!). > > Advice from the list would be appreciated before I ‘commit’ to this > project. > > TIA, > > Charlie Nelson > Water Phantom > 1995 C&C 36 XL/kcb > > Sent from AOL Mobile Mail > Get the new AOL app: mail.mobile.aol.com > > On Sunday, August 16, 2020, Steve Thomas via CnC-List < > [email protected]> wrote: > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
