The question needs to be presented to Mack Boring, the Yanmar distributor and OEM interface with most boat builders east of the Mississippi River. They know what can and can not be replaced or serviced. Good folks work there.
https://mackboring.com/ Chuck Gilchrest Half Magic 1983 LF 35 Sent from my iPhone > On Jun 15, 2021, at 7:42 AM, Steve Mallett via CnC-List > <cnc-list@cnc-list.com> wrote: > > > Has he tried CME in Burnside? I had my transmission rebuilt there 2 years ago > with good results. CME is Yanmar parts dealer as well. > > Steve Mallett > Second Lady C&C32 > Dartmouth, NS > >> On Tue, Jun 15, 2021, 8:33 AM Danny Haughey via CnC-List, >> <cnc-list@cnc-list.com> wrote: >> I know! that's ridiculous! If this is true, why would anyone want a Yanmar >> engine? He should have contacted Tartan directly. I've had so much help >> from them over the last 5 years owning my Tartan 40 and it's 36 years old. >> I can't imagine that they would not have had a reasonable solution for him. >> Maybe a connection to a local Mech that would have taken on the repair? >> >> They've actually helped a situation when the local yard was doing their best >> chicken little impression saying "this is NEVER going to work, it will >> jeopardize your safety..." Tartan stepped in and cooled all heads. They >> wrote a letter on company letterhead to confirm that not only was the >> condition safe but they had numerous boat out on the water with the exact >> same setup and were still using the same setup on new boats! >> >> Sometimes, I think, locally, all the guys in the trade know each other and >> they all speak to one another and they all back each other up. I've been on >> the receiving end of that situation too. You have to go outside your local >> environment for a true 2nd opinion. I'm lucky enough to have a company >> still in business and more than willing to keep their older boats up of to >> snuff! I would imagine with such a new model, they'd have been more than >> willing to help out. The last thing they want is that type of story getting >> out that their putting in engines that can't be repaired... >> >> Or, maybe your friend just didn't want to wait for a repair and the engine >> swap was faster? I bet he could still reach out to tartan and get that >> thing fixed right up. Worst case scenario, he could ship it to them and >> have it repaired by them. Imagine having a spare engine laying around for a >> swap out if another repair is needed (if they are identical). I know a guy >> with a Viking 33 that has a completely rebuilt and pristine atomic 4 in his >> garage for that very purpose! He says he can swap out the engine and dial >> it in within a day. >> >> Danny >> >> ---------- Original Message ---------- >> From: "Dennis C. via CnC-List" <cnc-list@cnc-list.com> >> To: Stus-List <cnc-list@cnc-list.com> >> Cc: "Dennis C." <capt...@gmail.com> >> Subject: Stus-List Re: Question?? >> Date: Mon, 14 Jun 2021 20:53:15 -0500 >> >> There are 68 Kanzaki transmissions listed on eBay right now. Perhaps one >> will work. There are also sites that sell used and rebuilt trannies. I >> find it hard to believe he needs a new tranny AND engine. >> >> -- >> Dennis C. >> Touche' 35-1 #83 >> Mandeville, LA >> >>> On Mon, Jun 14, 2021 at 6:32 PM Robert Abbott via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> A club member has a 2012 Tartan 37 with a 3 cylinder Yanmar diesel ....I >>> don't know the transmission type....he bought it in 2014 ....got a good >>> deal then on price....the engine now has 200 hours but just after he >>> launched 6 weeks ago, his transmission failed....marine diesel >>> contractors (3 of them) said transmission could not be repaired.....so >>> he needs a new transmission. >>> >>> Wrong, he is informed by all 3 diesel mechanics and Yanmar, that there >>> is not a transmission available to match his Yanmar engine. So guess >>> what, he has to buy a new engine and transmission. >>> >>> Has anyone ever heard of this where there is no transmission to fit a >>> Yanmar? >>> >>> Rob Abbott >>> AZURA >>> C&C 32 -#277 >>> Halifax, N.S. >>> Thanks to all of the subscribers that contributed to the list to help with >>> the costs involved. If you want to show your support to the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >>> Stu >> >> >> Thanks to all of the subscribers that contributed to the list to help with >> the costs involved. If you want to show your support to the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >> Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
