Investigate Electro Scan potty processor. Converts seawater to acid and sterilizes outflow No tank. Small unit. 15 amp. Cost about $1,500. Type 1 Coast Guard approved. Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: Trevor Parry via CnC-List <cnc-list@cnc-list.com> Sent: Thursday, July 1, 2021 6:47:51 AM To: Stus-List <cnc-list@cnc-list.com> Cc: Trevor Parry <trevorparry...@gmail.com> Subject: Stus-List Re: From Richard 30/40+
I am looking into a holding tank for my 25 . Various Chandlery outlets told me that the solid plastic tanks can be custom ordered based on dimensions, size, shape etc. Might be pricier than a typical rectangular tank if you need a curved set up to follow the hull shape. On Thu., Jul. 1, 2021, 10:00 a.m. Doug Mountjoy via CnC-List, <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I fabricated a holding tank out of fiberglass. The old one was made from stainless and had corroded through. Sent from my T-Mobile 4G LTE Device Doug Mountjoy Port Orchard YC Port Orchard, WA sv Rebecca Leah 1988 C&C LF39 -------- Original message -------- From: John and Maryann Read via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Date: 7/1/21 3:54 AM (GMT-08:00) To: 'Stus-List' <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: John and Maryann Read <johnprea...@gmail.com<mailto:johnprea...@gmail.com>> Subject: Stus-List Re: From Richard 30/40+ Richard Would question using aluminum for a holding tank. Corrosion and all that. Know tank fabricators here on east coast but not on west so maybe someone else can chime in? John and Maryann Legacy III 1982 C&C 34 Noank, CT From: richard hosker via CnC-List [mailto:cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>] Sent: Wednesday, June 30, 2021 7:39 PM To: C&C Email List Cc: richard hosker Subject: Stus-List From Richard 30/40+ Good Day I am asking for help Has anyone removed replaced a holding tank from a C@C 37+ located underneath and behind the sink in the head. I removed mine it was an aluminum tank very rusty and starting to leak. This was not fun to do But Len a 37+ owner (no longer) helped me with what to do I have spoken with Peter at Holland Marine but his tanks are 21” wide and mine is 16” wide with a slope to fit the shape of the hull. Does anyone know or have a source for a replacement tank to go back in its original space. I have spoken with a few owners who have located a tank in the port side salon bunk but I want to keep the original location Thanks in advance Richard Hosker Malo 37+ 1989 no 9 San Diego ca. Sent from Mail<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgo.microsoft.com%2Ffwlink%2F%3FLinkId%3D550986&data=04%7C01%7C%7C4442336194b84548404308d93c9f3e57%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637607476904649272%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8WTduR7F4xQGRKaVZrRsDoKltGxUASArchKb%2BFEcNw8%3D&reserved=0> for Windows 10 Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=04%7C01%7C%7C4442336194b84548404308d93c9f3e57%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637607476904649272%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=YumJJWdf4dTOFPDP4TQFu9ATkGR%2FvzdIZSEH9Hxh9y0%3D&reserved=0> Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
