He said no it was to far gone and the model transmission lots of people said were still on part or were hard to find
On Wed, Dec 29, 2021 at 10:41 PM John Read <johnprea...@gmail.com> wrote: > Hi Joel > > > > Just a thought would your friend be better served to rebuild his current > tranny? No issues of fit or ratios and a lot less cost. When the Kanzaki > KM3-A tranny on my Yanmar 3GM started slipping, it was near impossible to > find a replacement. Had it rebuilt by a local marina / transmission shop > and they botched the job which I understand is easy to do. I wound up > getting it rebuilt by a very knowledgeable and experienced fellow in New > Jersey. He was the tech who actually did the rebuilds at Mack Boring the > east coast distributor for Yanmar. When they went out of the rebuild > business he set up his own shop. Shipped it to him by parcel post, he > turned it around in a week and I had it reinstalled just in time for a > charter. That was 2016 and running like a champ ever since. > > > > East Coast Marine Transmission > <http://www.eastcoastmarinetransmission.com/> > > Rick Neary > > East Coast Marine Transmission > > Perth Amboy, NJ > > 732-991-0694 > > > > No interest in firm or knowledge of current status, just happy customer > > > > > > John Read > > Legacy III > > 1982 C&C 34 > > Noank, CT > > > > *From:* Joel Delamirande via CnC-List [mailto:cnc-list@cnc-list.com] > *Sent:* Wednesday, December 29, 2021 3:43 PM > *To:* Stus-List > *Cc:* Joel Delamirande > *Subject:* Stus-List Looking for a transmission for a yanmar > > > > Good afternoon sailors > > I have a sailor looking to buy a transmission > > For a yanmar 3HM35F or a replacement transmission > > Joel > > -- > > Joel Delamirande > > *www.jdroofing.ca <http://www.jdroofing.ca>* > > > -- Joel Delamirande *www.jdroofing.ca <http://www.jdroofing.ca>*
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
