Agree with Ken. Chasing the old threads could work if enough is still left from your extraction. Or Drilling out the old threads and tapping a size larger diameter thread should work as well. A Machine shop can do this in their sleep.
Regards, Bob Tallman 631.387.6748 On Sat, Oct 15, 2022 at 7:20 AM, Ken Heaton via CnC-List<cnc-list@cnc-list.com> wrote: I think you will have more luck at a local machine shop, either repairing the existing thread (weld and redrill and tap), or drilling and tapping a new hole elsewhere on the donut. Ken H. On Fri, 14 Oct 2022 at 21:44, carlfreemanjr--- via CnC-List <cnc-list@cnc-list.com> wrote: Hi all, Dropped the rudder on our C&C34. The set screw on the Donut nut were seized so they got drilled out. The rudder post threads fared fine but the Donut nut needs to be changed. Does anyone have a source for these or an alternative? Sent an email to Holland Marine but am not hopeful. Thanks for any help, Carl