Or take it to a competent Machine Shop that also does aluminium welding? I'm guessing the crack is from water freezing inside in the winter when the mast was stored? Odd otherwise.
Ken H. On Mon, 7 Nov 2022 at 07:18, Joel Delamirande via CnC-List < cnc-list@cnc-list.com> wrote: > I would say klacko marine in St. Catharines Ontario > Or maybe metal store and make your own > Or a scrap yard for boat > > On Mon, Nov 7, 2022 at 3:39 AM Macdara Vallely via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Hi, >> Anyone got any experience replacing spreader on an 80s C&C? >> I have a 1982 C&C 32 cb. The crack in the picture is on the SB spreader >> leading >> edge. >> >> Here is a link to a photo of the damaged section >> https://drive.google.com/file/d/1PqaaEQj_VdWYvkdtyLgIO11Gto9svM9J >> >> >> I want to replace but don’t know where to source the part. >> In the meantime, would it be worth trying to throughbolt or rivet plates >> top and bottom to increase strength? Or would the necessary holes >> compromise further? >> All advice much appreciated. >> >> Thanks >> Macdara >> NYC >> -- >> Macdara >> > -- > Joel Delamirande > *www.jdroofing.ca <http://www.jdroofing.ca>* > >
