Deck is solid.  I’ve over bored and filled many of the hardware mounting
points but some remain that do slightly leak.  Also some minor leaking in
the v berth along the toe rail.  Standing rigging was inspected in 2018.
Headstay was replaced then.  The back stay adjuster failed in 2021 when I
was in Guatemala so I replaced it in a pinch with a new static one.  I
still have the old one and the adjuster.  Chain plates are in great
condition. Keel bolt plates and nuts were replaced in 2018 and were
torqued.  Still in great condition.  Mast step was glassed before I got it
and is in great condition.

Main sail was new in 2018 and is in very good condition.  Genoa came with
the boat and is in above average condition.  I had some sewing redone and
the sun cover replaced in 2021.



On Sat, Dec 10, 2022 at 3:54 PM Joel Delamirande <joel.delamira...@gmail.com>
wrote:

> How the deck rigging and sails
>
> On Sat, Dec 10, 2022 at 12:32 PM Kevin Benoit via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> With regret, I am selling my boat. She was last sailed from Rio Dulce
>> Guatemala to New Orleans in 2021 and performed beautifully. She's been
>> sitting idle since and the engine is seized up. I just don't have time to
>> either get her into working condition or sail her and I can't bear to see
>> her fall into further disrepair. The reserve is set below the price of the
>> electronics alone. Please share and I'm happy to answer any questions.
>>
>> EBAY <https://www.ebay.com/itm/134359948568>
>>
>>
>> Kevin Benoit
>> 225-205-2373
>> Please show your appreciation for this list and the Photo Album site and
>> help me pay the associated bills.  Make a contribution at:
>> https://www.paypal.me/stumurray
>> Thanks for your help.
>> Stu
>
> --
> Joel Delamirande
> *www.jdroofing.ca <http://www.jdroofing.ca>*
>
> --
Kevin Benoit
225-205-2373
Please show your appreciation for this list and the Photo Album site and help 
me pay the associated bills.  Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu

Reply via email to