Or a heli-coil Joel
On Fri, Mar 10, 2023 at 8:11 AM Rob Hamlin via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks Jeff that was my other question, what’s under the fiberglass. > > Yes I was able to get the bolts out. Good thought on retapping and larger > size. > > -Rob > > Sent from my iPhone > > > On Mar 10, 2023, at 7:43 AM, Jeff Nelson via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > Well that's going to be fun. Have you been able to take the old bolts > out, and is it possible to tap a new thread > > next size up? That would be easiest solution. Otherwise, Major > re-construction in your future, I see. > > Good news, If yours is like my 30, it is a big mass of fiberglass topped > with a steel plate. Maybe you could wap > > it with a new steel plate and through drill it from the sides to secure > it. Otherwise grinder and lots of new > > fiberglass. > > > > Cheers, > > Jeff Nelson > > Muir Caileag > > C&C 30 - 549 > > Armdale Y.C. > > > >> On 2023-03-10 06:17, Rob Hamlin via CnC-List wrote: > >> Hi > >> I’m replacing the motor mounts C&C 37+, Yanmar 3HM35F motor. > >> > >> Removed the two back mounts, looks like they are held in by machine > bolts into bed. The front two bolts holding each mount were stripped. > >> > >> Question, anyone else came across this? thoughts on solution to > re-fasten/bed the bolts. > >> > >> -Rob > >> Please show your appreciation for this list and the Photo Album site > and help me pay the associated bills. Make a contribution at: > >> https://www.paypal.me/stumurray > >> Thanks for your help. > >> Stu > > Please show your appreciation for this list and the Photo Album site and > help me pay the associated bills. Make a contribution at: > > https://www.paypal.me/stumurray > > Thanks for your help. > > Stu > Please show your appreciation for this list and the Photo Album site and > help me pay the associated bills. Make a contribution at: > https://www.paypal.me/stumurray > Thanks for your help. > Stu -- Joel
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
