FWIW, I worked as an HVAC mechanic and know there are teflon tapes rated specifically for Gas. But the only time I used teflon tape is when threads were damaged and I followed up with Megaloc on top of it. I never like using tape as threads of tape can wind up clogging valves downstream. I never liked using teflon as tape or paste as I found leaks later. Megaloc works on everything including fuel, water, gas, gasoline, oxygen, acids, etc. My company wound up specifying it for all situations and it paid off in the long run. It's good stuff. C
> On 07/15/2023 10:08 AM EDT Jeffrey A. Laman via CnC-List > <cnc-list@cnc-list.com> wrote: > > > I will be very interested in this discussion as I plan to replace my exhaust > riser assembly soon. I recently had a propane gas line installed in my house > and the technician cringed at the telfon tape used on the existing pipe. Not > the same thing of course, but never would have expected teflon tape does not > meet building code! > > Also, if anyone reading this thread has a source recommendation for an > exhaust riser/mixing elbow supplier, I would be grateful. Engine is a 1981 > Yanmar 3GM 20 hp (not the 30 hp as in many boats). > > Jeff Laman > 1981 C&C34 Harmony > Ludington, MI > > > --------------------------------------------- > From: Doug Mountjoy via CnC-List <cnc-list@cnc-list.com> > Sent: Saturday, July 15, 2023 10:01 AM > To: Stus-List <cnc-list@cnc-list.com> > Cc: Doug Mountjoy <svrebeccal...@gmail.com> > Subject: Stus-List Re: pipe dope for Exhaust Riser > > I use Teflon tape on the pipe threads. A couple of wraps is good. > > Douglas Mountjoy > 1988 LF 39 > Mexico at large > 1984 Sabre 34 > Port Orchard, WA > > > On Sat, Jul 15, 2023, 06:30 CHARLES SCHEAFFER via CnC-List > <cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com> wrote: > > > Here's a question for the mechanics in the group. > > > > I am replacing the engine's exhaust riser or mixing elbow and associated > > threaded 1 1/4" and 1 1/2" nipples, and want to use the right pipe dope > > that can handle the heat and make a good seal and hopefully make it easier > > to take apart for the next person. > > > > I've been adised to use Never-Sieze on the bolts holding the flange and > > want to use Megaloc by Hercules on the pipe threads, but don't see any > > temperature stats on the can. > > > > Any suggestions? > > > > Chuck Scheaffer, Resolute, 1989 C&C 34R Annapolis > > Please show your appreciation for this list and the Photo Album site and > > help me pay the associated bills. Make a contribution at: > > https://www.paypal.me/stumurray > > Thanks for your help. > > Stu > > > Please show your appreciation for this list and the Photo Album site and help > me pay the associated bills. Make a contribution at: > https://www.paypal.me/stumurray > Thanks for your help. > Stu >
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
